Differences

This shows you the differences between two versions of the page.

--- kit:software_configuration [2018/08/01 23:07] – [Introduction] - Added UNO guide steve
+++ kit:software_configuration [2018/09/22 15:18] (current) – [Step Two: Download the CrOS Software] - Updated source file names steve
@@ Line 1: / Line 1: @@
-====== Introduction ======
+====== CrowBox Software Configuration ======
 The programmable computer brain that controls the CrowBox is the [[https://store.arduino.cc/arduino-uno-rev3|Arduino UNO microcontroller board]].
@@ Line 27: / Line 28: @@
   -Download the latest version of the [[kit:cros_software|CrOS software]].
-  -You will receive a file named something like **cros_v011.zip**. Double-click this file to extract the .zip archive
+  -You will receive a file named something like **cros_v099a.zip**. Double-click this file to extract the .zip archive
-  -The archive should create a folder called **cros_source** which contains the CrOS source code files, which have extensions like .h, .cpp, and a file named **cros.ino**
+  -The archive should create a folder called **cros** which contains the CrOS source code files, which have extensions like .h, .cpp, and a file named **cros.ino**
 ====== Step Three: Load CrOS software into the Arduino IDE ======
@@ Line 48: / Line 49: @@
       - In the Arduino IDE menu, select TOOLS->PORT-> and then select the port named starting with **/dev/tty.usbmodem** or **/dev/tty.usbserial**. The port name will probably end with an unusual alphanumeric string.
     - Linux
+      - We have no instructions for this step at present!
       - If you are familiar with the Arduino IDE on Linux, please contact us on the Google Group to contribute to this section