Differences

This shows you the differences between two versions of the page.

--- kit:assembly_outline [2017/01/11 22:17] – [Build It!] steve
+++ kit:assembly_outline [2018/08/01 13:37] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-This is the **outline** of the assembly instructions for the new Crowbox (internal note: Ploppy v007)
+This is the **outline** of the assembly instructions for the new CrowBox (internal note: Ploppy v007)
 ====== Set up your work area ======
@@ Line 21: / Line 21: @@
   * Recommend precision applicator tip
 ====== Build Phase One: Sub-assemblies ======
-In this first phase we'll be taking various acrylic parts from the Crowbox kit and assembling them into larger parts of the machine. In Phase Two we'll put the finished machine together from these sub-assemblies.
+In this first phase we'll be taking various acrylic parts from the CrowBox kit and assembling them into larger parts of the machine. In Phase Two we'll put the finished machine together from these sub-assemblies.
 ===== Baseplate sub-assembly =====
-The **Baseplate** is the platform upon which the entire Crowbox is built. In this step we'll be adding some reinforcement to the baseplate to make it stronger at the points where the Crowbox will be screwed to a pole or platform.
+The **Baseplate** is the platform upon which the entire CrowBox is built. In this step we'll be adding some reinforcement to the baseplate to make it stronger at the points where the CrowBox will be screwed to a pole or platform.
@@ Line 78: / Line 78: @@
   - FIXME - Steps!
+===== Coin Slide sub-assembly =====
+The **Coin Slide** is an acrylic ramp that catches coins from the **funnel** and transmits them to the inside of the CrowBox for storage. The **coin slide** features a network of thin copper wires which also electronically detect the metal coin as it slides into the CrowBox for storage.
+==== Gather Parts & Supplies ====
+  * Coin slide x1
+  * Coin slide side rails x2
+  * 24 gauge bare copper wires. 7x12 inch lengths
+  * 3M self-adhesive noise dampening mat
+  * Plastic cement
+==== Build it! ====
+  - Peel all protective paper from all acrylic parts
+  - Cement side rails to coin slide
+  - Attach and trim sound dampening material
+  - Weave the wires
 ===== Rail sub-assemblies =====
-Here we'll assemble the rails upon which the **basket lid** will slide. These rails also contribute to the overall structural strength of the Crowbox machine.
+Here we'll assemble the rails upon which the **basket lid** will slide. These rails also contribute to the overall structural strength of the CrowBox machine.
 ==== Gather Parts & Supplies ====
@@ Line 124: / Line 140: @@
 ===== Coin Magazine sub-assembly =====
-The **coin magazine** holds the Crowbox's supply of training coins, which will later be automatically dispensed to help train Crows.
+The **coin magazine** holds the CrowBox's supply of training coins, which will later be automatically dispensed to help train Crows.
 ==== Gather Parts & Supplies ====