User Tools

Site Tools


kit:geometry_files

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
kit:geometry_files [2018/08/01 20:18] – Added parts preview and materials notes stevekit:geometry_files [2023/02/01 18:25] (current) – [Download Files] steve
Line 1: Line 1:
-====== Introduction ======+====== CrowBox Laser Cutter Files  ====== 
 + 
 +This section is provided for those who intend to do their own laser cutting. Here we provide detailed notes on the type and specifications for materials required to cut each of the four sheets of parts. 
 + 
 +We also provide the actual laser-cutter-ready geometry files in .DXF format. Those are available in the **Download Files** section at the bottom of this page. 
  
 ====== Preview of parts geometry ====== ====== Preview of parts geometry ======
 For reference purposes, here are preview images of the four sheets of laser-cut components, along with specific notes on the type of material that should be used to fabricate each sheet. For reference purposes, here are preview images of the four sheets of laser-cut components, along with specific notes on the type of material that should be used to fabricate each sheet.
  
-To download the //actual// ready-to-cut geometry for these parts, scroll to the bottom of this page.+**NOTE:** These are image-based previews of each parts sheet, for reference and identification. To download the //actual// ready-to-cut geometry for these parts, scroll to the bottom of this page.
  
 ^ Sheet Description      ^ Sheet Preview       ^ ^ Sheet Description      ^ Sheet Preview       ^
Line 14: Line 19:
  
 ====== Download Files ====== ====== Download Files ======
-  * {{ :kit:CrowBox_v2_geometry_for_laser_cut_r1.zip | Download}} CrowBox geometry in .DXF format+The files provided here have been exported to .DXF file format with millimeters as the unit and ready for laser cutting.  
 + 
 +{{ :kit:crowbox_v2_r3_dxf.zip |}} 
 + 
 +Inside this zip archive you will find four files, each one having a filename suffix which indicates which material the sheet is intended to be cut from: 
 + 
 +  * _transparent.dxf - Cut these parts from transparent acrylic 
 +  * _light.dxf - Cut these parts from light-colored opaque acrylic 
 +  * _dark.dxf - Cut these parts from dark-colored opaque acrylic 
 +  * _styrene.dxf - Cut these parts from 0.5mm thick white sheet styrene 
 + 
 +**NOTE:** You may choose to cut both the 'light' and 'dark' parts from the same color acrylic but **please note** that the assembly instructions video will refer to parts from the 'light' sheet and the 'dark' sheet, so if you cut your colored parts from a single color you may find it a bit more work when it comes to identifying parts during the assembly process. It's not a severe issue, but worth noting. 
kit/geometry_files.1533179887.txt.gz · Last modified: 2018/08/01 20:18 by steve