User Tools

Site Tools


kit:tools_and_helpers

This is an old revision of the document!



Warning: "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? in /nfs/c01/h03/mnt/44066/domains/thecrowbox.com/html/wiki/inc/parser/handler.php on line 1552

Printable Tools & Helpers

Download and print these PDF files before you build your CrowBox. Instructions on how to use these items are given in the CrowBox assembly videos.

Housing Helpers

IMPORTANT: After printing, use a ruler to verify the measurements shown on each sheet before you attempt to use these items. When properly printed, the width of the alignment guide should be exactly 8 inches. The height of each coin loading chute should be exactly 2 inches. If the measurements are not correct, try printing the pages again at actual size. To do this you may either have to check a box in the print dialog that reads “actual size” or un-check a box which reads “fit to page”.

Electronics Helpers

kit/tools_and_helpers.1536378764.txt.gz · Last modified: 2018/09/07 20:52 by steve