User Tools

Site Tools


kit:tools_and_helpers

Printable Tools & Helpers

Download and print these PDF files before you build your CrowBox. Instructions on how to use these items are given in the CrowBox assembly videos.

Housing Helpers

IMPORTANT: After printing, use a ruler to verify the measurements shown on each sheet before you attempt to use these items. When properly printed, the width of the alignment guide should be exactly 8 inches. The height of each coin loading chute should be exactly 2 inches. If the measurements are not correct, try printing the pages again at actual size. To do this you may either have to check a box in the print dialog that reads “actual size” or un-check a box which reads “fit to page”.

Electronics Helpers

Mounting Helpers

kit/tools_and_helpers.txt · Last modified: 2018/09/22 11:54 by steve