Differences

This shows you the differences between two versions of the page.

--- kit:tools_and_helpers [2018/09/07 20:50] – Added wiring chart steve
+++ kit:tools_and_helpers [2025/08/19 09:50] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== Printable Tools & Helpers ======
-Download and print these PDF files before you build your CrowBox. Instructions on how to use these items are given in the CrowBox assembly videos.
+Download and print these PDF files before you build your CrowBox.
-**IMPORTANT:** After printing, use a ruler to verify the measurements shown on each sheet //before// you attempt to use these items. When properly printed, the width of the alignment guide should be exactly **8 inches**. The height of each coin loading chute should be exactly **2 inches**. If the measurements are not correct, try printing the pages again at actual size. To do this you may either have to check a box in the print dialog that reads "actual size" or un-check a box which reads "fit to page".
+===== Organizational Helpers =====
+This Bill of Materials Checklist can be used to help you make sure you've collected everything you need to get started on your Crowbox build. Print this out and check off items as they are found, purchased, or ordered!
+  * {{ :gen3kit:pdfs:crowbox_gen3_bom_checklist.pdf | Crowbox Bill of Materials checklist }}
-  * {{ :kit:crowbox_basket_alignment_guide.pdf | Basket alignment guide}} - Used when building the basket portion of your CrowBox
+===== Safety Helpers =====
-  * {{ :kit:crowbox_coin_loading_chutes.pdf | Coin loading chutes}} - These take the headache out of loading training coins into a CrowBox
+These safety labels are designed for printing on Avery 8167 'return address labels', but they can also be printed on plain paper, cut out, and taped in position. Placement of these labels is covered in the assembly instruction videos.
-  * {{ :kit:crowbox_wiring_chart.pdf | CrowBox wiring chart}} - Required (along with the YouTube video) to complete the CrowBox wiring
+  * {{ :gen3kit:pdfs:crowbox_warninglabels_en.pdf | Crowbox Safety Warning Labels }}
+===== Electronics Helpers =====
+  * {{ :gen3kit:pdfs:crowbox_gen3_wiring_guide.pdf | CrowBox wiring guide}} - Required (along with the YouTube video) to complete the CrowBox wiring
+===== Mounting Helpers =====
+**IMPORTANT:** After printing, use a ruler to verify the measurements shown on this sheet //before// you attempt to use it as a template for mounting. If the measurements are not correct, try printing the pages again at 'actual size' or '100% scale'. To do this you may either have to check a box in the print dialog that reads "actual size" or un-check any boxes which read "fit to page" or "fill entire page".
+  * {{ gen3kit:pdfs:crowbox_gen3_mounting_template.pdf | CrowBox mounting guide}}