crowboxwiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Printable Tools & Helpers ======
Download and print these PDF files before you build your CrowBox.

===== Organizational Helpers =====
This Bill of Materials Checklist can be used to help you make sure you've collected everything you need to get started on your Crowbox build. Print this out and check off items as they are found, purchased, or ordered! 
  * {{ :gen3kit:pdfs:crowbox_gen3_bom_checklist.pdf | Crowbox Bill of Materials checklist }}

===== Safety Helpers =====
These safety labels are designed for printing on Avery 8167 'return address labels', but they can also be printed on plain paper, cut out, and taped in position. Placement of these labels is covered in the assembly instruction videos.
  * {{ :gen3kit:pdfs:crowbox_warninglabels_en.pdf | Crowbox Safety Warning Labels }}

===== Electronics Helpers =====
  * {{ :gen3kit:pdfs:crowbox_gen3_wiring_guide.pdf | CrowBox wiring guide}} - Required (along with the YouTube video) to complete the CrowBox wiring

===== Mounting Helpers =====
**IMPORTANT:** After printing, use a ruler to verify the measurements shown on this sheet //before// you attempt to use it as a template for mounting. If the measurements are not correct, try printing the pages again at 'actual size' or '100% scale'. To do this you may either have to check a box in the print dialog that reads "actual size" or un-check any boxes which read "fit to page" or "fill entire page". 

  * {{ gen3kit:pdfs:crowbox_gen3_mounting_template.pdf | CrowBox mounting guide}}