====== Acrylic Parts Overview ======
**NOTE** The parts need to be recounted since splitting the small ribs in half!

There are **46** total laser cut acrylic parts in a CrowBox Kit (v007)
====== Transparent Parts ======
**19** parts cut from transparent acrylic sheet

  * 1x Rotor
  * 1x Rotor servo horn shoe
  * 2x Inner coin slides (formerly shoulders)
  * 1x Coin slide
  * 2x Coin slide rails
  * 1x Basket faceplate
  * 2x Basket faceplate rib, halves
  * 2x Rail ledger supports
  * 2x Rail retainer supports
  * 2x Funnel reinforcement
  * 4x Coin pushers (Small parts! Two extra provided)

====== Tinted Parts ======
**1** part cut from blue-tinted transparent acrylic sheet
  * Sliding lid for reward basket

====== Green Parts ======
**9** Parts cut from green colored acrylic sheet
  * 1x Body panel - front
  * 1x Body panel - rear
  * 1x Body panel - left
  * 1x Body panel - right
  * 1x Body panel - top                    
  * 2x Rail
  * 1x Perch pivot bar
  * 1x Service door

====== Ivory Parts ======
**17** parts cut from ivory colored acrylic sheet

  * 1x Baseplate
  * 4x Reinforcing rings
  * 2x Front panel small rib, halves
  * 2x Front panel large rib, halves
  * 1x Electronics sled
  * 1x Servo support
  * 1x Perch
  * 2x Coin supports
  * 4x Coin magazine panels (front, rear, left, right)