Note: This section of the site is about Version 2 of the Crowbox
This version has been depreciated. Learn more about the latest version here.
Download and print these PDF files before you build your CrowBox. Instructions on how to use these items are given in the CrowBox assembly videos.
IMPORTANT: After printing, use a ruler to verify the measurements shown on each sheet before you attempt to use these items. When properly printed, the width of the alignment guide should be exactly 8 inches. The height of each coin loading chute should be exactly 2 inches. If the measurements are not correct, try printing the pages again at actual size. To do this you may either have to check a box in the print dialog that reads “actual size” or un-check a box which reads “fit to page”.