Download and print these PDF files before you build your CrowBox. Instructions on how to use these items are given in the CrowBox assembly videos.

IMPORTANT: After printing, use a ruler to verify the measurements shown on each sheet before you attempt to use these items. When properly printed, the width of the alignment guide should be exactly 8 inches. The height of each coin loading chute should be exactly 2 inches. If the measurements are not correct, try printing the pages again at actual size. To do this you may either have to check a box in the print dialog that reads “actual size” or un-check a box which reads “fit to page”.

• Basket alignment guide - Used when building the basket portion of your CrowBox
• Coin loading chutes - These take the headache out of loading training coins into a CrowBox

• CrowBox wiring chart - Required (along with the YouTube video) to complete the CrowBox wiring

• CrowBox mounting guide