crowboxwiki

User Tools

Site Tools

Trace:
kit:software_configuration

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
kit:software_configuration [2018/08/01 22:58] – [Step Four: Connect your Arduino UNO board] stevekit:software_configuration [2018/08/01 23:05] – [Step Four: Connect your Arduino UNO board] - OSX port settings steve
Line 45: Line 45:
       - Examples: **COM6 (Arduino/Genuino Uno)** or **COM3 (Arduino/Genuino Uno)**       - Examples: **COM6 (Arduino/Genuino Uno)** or **COM3 (Arduino/Genuino Uno)**
     - Mac OSX     - Mac OSX
-      - In the Arduino IDE menu, select TOOLS->PORT->FIXME+      - In the Arduino IDE menu, select TOOLS->PORT-> and then select the port named starting with **/dev/tty.usbmodem** or **/dev/tty.usbserial**. The port name will probably end with an unusual alphanumeric string.
     - Linux     - Linux
       - If you are familiar with the Arduino IDE on Linux, please contact us on the Google Group to contribute to this section       - If you are familiar with the Arduino IDE on Linux, please contact us on the Google Group to contribute to this section
kit/software_configuration.txt · Last modified: 2018/09/22 15:18 by steve