Differences

This shows you the differences between two versions of the page.

--- kit:geometry_files [2018/08/01 20:18] – Added parts preview and materials notes steve
+++ kit:geometry_files [2018/08/01 20:29] – [Introduction] grammar steve
@@ Line 1: / Line 1: @@
 ====== Introduction ======
+This section is provided for those who intend to do their own laser cutting. Here we provide detailed notes on the type and specifications for materials required to cut each of the four sheets of parts.
+We also provide the actual laser-cutter-ready geometry files in .DXF format. Those are available in the **Downloads** section at the bottom of this page.
 ====== Preview of parts geometry ======
 For reference purposes, here are preview images of the four sheets of laser-cut components, along with specific notes on the type of material that should be used to fabricate each sheet.
-To download the //actual// ready-to-cut geometry for these parts, scroll to the bottom of this page.
+**NOTE:** These are image-based previews of each parts sheet, for reference and identification. To download the //actual// ready-to-cut geometry for these parts, scroll to the bottom of this page.
 ^ Sheet Description      ^ Sheet Preview       ^
@@ Line 14: / Line 18: @@
 ====== Download Files ======
-  * {{ :kit:CrowBox_v2_geometry_for_laser_cut_r1.zip | Download}} CrowBox geometry in .DXF format
+  * {{ :kit:CrowBox_v2_geometry_for_laser_cut_r1.zip | Download}} CrowBox housing parts geometry in .DXF format