This is an old revision of the document!

Introduction

This section is provided for those who intend to do their own laser cutting. Here we provide detailed notes on the type and specifications for materials required to cut each of the four sheets of parts.

We also provide the actual laser-cutter-ready geometry files in .DXF format. Those are available in the Downloads section at the bottom of this page.

Preview of parts geometry

For reference purposes, here are preview images of the four sheets of laser-cut components, along with specific notes on the type of material that should be used to fabricate each sheet.

NOTE: These are image-based previews of each parts sheet, for reference and identification. To download the actual ready-to-cut geometry for these parts, scroll to the bottom of this page.

Sheet Description	Sheet Preview
Acrylic - Dark Color Thickness: 3mm (.118 inch) Sheet Size: 15.1“ x 15.1”
Acrylic - Light Color Thickness: 3mm (.118 inch) Sheet Size: 15.1“ x 15.1”
Acrylic - Transparent Thickness: 3mm (.118 inch) Sheet Size: 15.1“ x 15.1”
Styrene - White Thickness: .5mm (.020 inch) Sheet Size: 15.1“ x 15.1”