Differences

This shows you the differences between two versions of the page.

--- community:builds [2026/09/01 02:10] – created admin
+++ community:builds [2026/09/01 02:11] (current) – [Community Builds & Variants] admin
@@ Line 3: / Line 3: @@
 Since the CrowBox was released, people have built their own adaptations of the
 design: different materials, different fabrication methods, different sizes.
-This page collects the ones we know about. If you have more, let us know!
+This page collects the ones we know about. If you have another, let us know!
 ===== Please read first =====
@@ Line 11: / Line 11: @@
 Listing a build here is not an endorsement of it.
-  * **For help with a community build, contact its creator**, not us. Questions
+  * **For help with a community build, contact its creator**, not us. Questions about these designs on our channels will be redirected.
-    about these designs on our channels will be redirected.
-  * **You are responsible for the safety of your own build.** Any box you put
+  * **You are responsible for the safety of your own build.** Any box you put outdoors will be used by live animals. Untested designs may have sharp edges, pinch points, entrapment risks, materials that degrade or become toxic outdoors, or mechanisms that fail in ways the original design does not. Assess your build yourself before deploying it, and check it regularly once deployed.
-    outdoors will be used by live animals. Untested designs may have sharp
-    edges, pinch points, entrapment risks, materials that degrade or become
+  * **Check the licence on each build before you use it.** Licence terms are set by the creator and may differ from ours.
-    toxic outdoors, or mechanisms that fail in ways the original design does
-    not. Assess your build yourself before deploying it, and check it regularly
-    once deployed.
-  * **Check the licence on each build before you use it.** Licence terms are set
-    by the creator and may differ from ours.
 ===== Builds =====
@@ Line 26: / Line 21: @@
 ==== 3D-printable housing conversion ====
-[[https://makerworld.com/en/models/3149211-crowbox|CrowBox for FDM 3D printing]]
+[[https://makerworld.com/en/models/3149211-crowbox|CrowBox for FDM 3D printing]] by NatureDevCH, hosted on MakerWorld. Converts the laser-cut housing panels into printable parts. The electronics, wiring, and CrOS software are unchanged from the standard build, so the [[kit:overview_doc|Overview Document]] and [[https://thecrowbox.com/wiki/doku.php?id=kit:bill_of_materials|Bill of Materials]] still apply for everything other than the housing. Published with our permission. Licensed CC BY-NC-SA 4.0.
-by NatureDevCH, hosted on MakerWorld. Converts the laser-cut housing panels into
-printable parts. The electronics, wiring, and CrOS software are unchanged from
-the standard build, so the [[kit:overview_doc|Overview Document]] and
-[[https://thecrowbox.com/wiki/doku.php?id=kit:bill_of_materials|Bill of Materials]]
-still apply for everything other than the housing. Published with our permission.
-Licensed CC BY-NC-SA 4.0.
 ----
@@ Line 38: / Line 27: @@
 ===== Built something? =====
-If you have made a CrowBox variant you would like listed here, tell us on the
+If you have made a CrowBox variant you would like listed here, tell us on the [[https://groups.google.com/g/crowbox|CrowBox Google group]]. We list builds that look like a good-faith adaptation of the project; we do not review them for safety or correctness.
-[[https://groups.google.com/g/crowbox|CrowBox Google group]]. We list builds that
-look like a good-faith adaptation of the project; we do not review them for
-safety or correctness.