Differences

This shows you the differences between two versions of the page.

--- kit:geometry_files [2018/08/12 12:11] – [Download Files] - Replaced r1 with r2 steve
+++ kit:geometry_files [2023/02/01 18:25] (current) – [Download Files] steve
@@ Line 19: / Line 19: @@
 ====== Download Files ======
-The files provided here have been exported to .DXF file format with millimeters as the unit.
+The files provided here have been exported to .DXF file format with millimeters as the unit and ready for laser cutting.
+{{ :kit:crowbox_v2_r3_dxf.zip |}}
+Inside this zip archive you will find four files, each one having a filename suffix which indicates which material the sheet is intended to be cut from:
+  * _transparent.dxf - Cut these parts from transparent acrylic
+  * _light.dxf - Cut these parts from light-colored opaque acrylic
+  * _dark.dxf - Cut these parts from dark-colored opaque acrylic
+  * _styrene.dxf - Cut these parts from 0.5mm thick white sheet styrene
+**NOTE:** You may choose to cut both the 'light' and 'dark' parts from the same color acrylic but **please note** that the assembly instructions video will refer to parts from the 'light' sheet and the 'dark' sheet, so if you cut your colored parts from a single color you may find it a bit more work when it comes to identifying parts during the assembly process. It's not a severe issue, but worth noting.
-  * {{ :kit:crowbox_v2_r2_dxf.zip | Download}} CrowBox housing parts geometry in .DXF format