Differences

This shows you the differences between two versions of the page.

--- kit:geometry_files [2023/01/22 10:11] – [Download Files] steve
+++ kit:geometry_files [2023/02/01 18:25] (current) – [Download Files] steve
@@ Line 19: / Line 19: @@
 ====== Download Files ======
 The files provided here have been exported to .DXF file format with millimeters as the unit and ready for laser cutting.
+{{ :kit:crowbox_v2_r3_dxf.zip |}}
-**NOTICE January 22, 2023**
+Inside this zip archive you will find four files, each one having a filename suffix which indicates which material the sheet is intended to be cut from:
-We have recently finished some minor changes to the design of the CrowBox acrylic parts, which should make the CrowBox easier to assemble. Updated DXF files of the CrowBox parts should be available right here, on or before January 31, 2023.
+  * _transparent.dxf - Cut these parts from transparent acrylic
+  * _light.dxf - Cut these parts from light-colored opaque acrylic
+  * _dark.dxf - Cut these parts from dark-colored opaque acrylic
+  * _styrene.dxf - Cut these parts from 0.5mm thick white sheet styrene
+**NOTE:** You may choose to cut both the 'light' and 'dark' parts from the same color acrylic but **please note** that the assembly instructions video will refer to parts from the 'light' sheet and the 'dark' sheet, so if you cut your colored parts from a single color you may find it a bit more work when it comes to identifying parts during the assembly process. It's not a severe issue, but worth noting.