Differences

This shows you the differences between two versions of the page.

--- kit:parts_list_v007 [2016/12/26 14:00] – [Components] steve
+++ kit:parts_list_v007 [2018/08/01 13:37] (current) – external edit 127.0.0.1
@@ Line 18: / Line 18: @@
   * Raspberry Pi Zero with camera bundle. Current best price: $40 (Adafruit)
   * Raspberry Pi servo hat. Current best price: $18 (Adafruit)
+  * Edimax USB wifi dongle. Current best price: $8 (Amazon)
-  Current total cost: $58.00
+  Current total cost: $66.00
 ===== Components =====
-  * Half-size breadboard. Cost: $5.00
+  * Hookup wire: 22AWG stranded. 25 feet RED, 25 feet BLACK. Cost: $6.00 for both spools
-  * Bullet terminals, 2 pairs (m/f) (4 pieces total)
+  * Dupont jumpers: GET COUNT. GET LENGTH. DETERMINE ENDS. FIND SOURCE.
-  * 24 AWG bare copper wire (90 inches). Cost: 25 cents per box if bought in bulk & portioned
+  * 1x Half-size breadboard. Cost: $5.00
+  * 3x Two-position screw terminals for breadboard. Cost $Repackaged from bulk
+  * 3x Mini limit switches for lid. Cost: $2.00 for three
+  * 4 pairs 22AWG m/f bullet terminals (8 pieces total) Cost: $Repackaged from bulk
+  * 8ft 24 AWG bare copper wire. Cost: 25 cents per CrowBox if bought in bulk & portioned
     * Otherwise, cost for entire roll
-  * Hookup wire: GET GAUGE. GET LENGTH. FIND SOURCE.
-  Current total cost: [needs computed]
+  Current total cost: $13.25 presently, but not all items accounted for yet.
+===== Voltage Regulator Components =====
+  * The actual regulator chip
+    * LM7806CZ DC 1.5A Positive Voltage Regulator, 6V
+  * Capacitor #1
+  * Capacitor #2
+  * Diode
 ===== Motor =====
 MG995 Metal gear servo. Current best price: $6.00 per servo
@@ Line 37: / Line 46: @@
 ====== Structural ======
+All information in this category currently assumes fabrication at PONOKO.COM
   *1/4 inch acrylic rod (for push rod)
-  *1/8" acrylic sheet (dark color)
+  *790x384x3mm acrylic sheet (solid color) - Cost: $25.23 fabricated
-  *1/8" acrylic sheet (light color)
+  *181x181x3mm acrylic sheet (translucent) - Cost: $4.50 fabricated
-  *1/8" acrylic sheet (transparent color)
+  *384x384x3mm acrylic sheet (transparent) - Cost: $9.13 fabricated
-  *1/8" acrylic sheet (translucent green color)
+  *384x384x.5mm styrene sheet (white) - Cost: $2.50 fabricated
+  Current Cost: $41.36 plus shipping
-  Current Cost: [Need quantities in order to determine pricing]
@@ Line 52: / Line 64: @@
   Current Cost: [Not done building the list of required fasteners]
+====== Grand Total ======
+**NOTE:** - This information is just the sum of the categories above. It WILL change before shipping. Some parts are not yet sourced, priced, or best-priced, so this number is just the closest estimate we have.
+===== Arduino Core =====
+  $88.61
+===== Raspberry Pi Core =====
+  $126.61