kit:parts_list_v007
Table of Contents
NOTE: Items marked with “Current Best Price” have not been comparison-shopped nor priced in bulk yet.
NOTE: Shipping costs not included! This could be a silent killer. Some items assume Amazon Prime membership
Electronics
Processor & Shields
Arduino Core
- Arduino Uno development board
- Cost (genuine): $16.00
- Cost (clone): $10.00
- SD Card shield Cost: $2.00
Current total cost: $28.00 - NOTE: No Camera with this config!
Raspberry Pi Core
- Raspberry Pi Zero with camera bundle. Current best price: $40 (Adafruit)
- Raspberry Pi servo hat. Current best price: $18 (Adafruit)
- Edimax USB wifi dongle. Current best price: $8 (Amazon)
Current total cost: $66.00
Components
- Hookup wire: 22AWG stranded. 25 feet RED, 25 feet BLACK. Cost: $6.00 for both spools
- Dupont jumpers: GET COUNT. GET LENGTH. DETERMINE ENDS. FIND SOURCE.
- 1x Half-size breadboard. Cost: $5.00
- 3x Two-position screw terminals for breadboard. Cost $Repackaged from bulk
- 3x Mini limit switches for lid. Cost: $2.00 for three
- 4 pairs 22AWG m/f bullet terminals (8 pieces total) Cost: $Repackaged from bulk
- 8ft 24 AWG bare copper wire. Cost: 25 cents per CrowBox if bought in bulk & portioned
- Otherwise, cost for entire roll
Current total cost: $13.25 presently, but not all items accounted for yet.
Voltage Regulator Components
- The actual regulator chip
- LM7806CZ DC 1.5A Positive Voltage Regulator, 6V
- Capacitor #1
- Capacitor #2
- Diode
Motor
MG995 Metal gear servo. Current best price: $6.00 per servo
Current total cost: $6.00
Structural
All information in this category currently assumes fabrication at PONOKO.COM
- 1/4 inch acrylic rod (for push rod)
- 790x384x3mm acrylic sheet (solid color) - Cost: $25.23 fabricated
- 181x181x3mm acrylic sheet (translucent) - Cost: $4.50 fabricated
- 384x384x3mm acrylic sheet (transparent) - Cost: $9.13 fabricated
- 384x384x.5mm styrene sheet (white) - Cost: $2.50 fabricated
Current Cost: $41.36 plus shipping
Fasteners
- M3 bolts (get specific on length, cap style, etc)
- M3 nuts
- Silicone rubber band for lid, two inch (include extras). Current best price: 25 cents per band
Current Cost: [Not done building the list of required fasteners]
Grand Total
NOTE: - This information is just the sum of the categories above. It WILL change before shipping. Some parts are not yet sourced, priced, or best-priced, so this number is just the closest estimate we have.
Arduino Core
$88.61
Raspberry Pi Core
$126.61
kit/parts_list_v007.txt · Last modified: 2018/08/01 13:37 by 127.0.0.1