kit:parts_list_v007
This is an old revision of the document!
−Table of Contents
NOTE: Items marked with “Current Best Price” have not been comparison-shopped nor priced in bulk yet.
NOTE: Shipping costs not included! This could be a silent killer. Some items assume Amazon Prime membership
Electronics
Processor & Shields
Arduino Core
- Arduino Uno development board
- Cost (genuine): $16.00
- Cost (clone): $10.00
- SD Card shield Cost: $2.00
Current total cost: $28.00 - NOTE: No Camera with this config!
Raspberry Pi Core
- Raspberry Pi Zero with camera bundle. Current best price: $40 (Adafruit)
- Raspberry Pi servo hat. Current best price: $18 (Adafruit)
Current total cost: $58.00
Components
- Hookup wire: 22AWG stranded. 25 feet RED, 25 feet BLACK. Cost: $6.00 for both spools
- Dupont jumpers: GET COUNT. GET LENGTH. DETERMINE ENDS. FIND SOURCE.
- 1x Half-size breadboard. Cost: $5.00
- 3x Two-position screw terminals for breadboard. Cost $Repackaged from bulk
- 3x Mini limit switches for lid. Cost: $2.00 for three
- 4 pairs m/f bullet terminals (8 pieces total) Cost: $Repackaged from bulk
- 8ft 24 AWG bare copper wire. Cost: 25 cents per box if bought in bulk & portioned
- Otherwise, cost for entire roll
Current total cost: [needs computed]
Motor
MG995 Metal gear servo. Current best price: $6.00 per servo
Current total cost: $6.00
Structural
- 1/4 inch acrylic rod (for push rod)
- 1/8“ acrylic sheet (dark color)
- 1/8” acrylic sheet (light color)
- 1/8“ acrylic sheet (transparent color)
- 1/8” acrylic sheet (translucent green color)
Current Cost: [Need quantities in order to determine pricing]
Fasteners
- M3 bolts (get specific on length, cap style, etc)
- M3 nuts
- Silicone rubber band for lid, two inch (include extras). Current best price: 25 cents per band
Current Cost: [Not done building the list of required fasteners]
kit/parts_list_v007.1482793111.txt.gz · Last modified: 2016/12/26 14:58 by steve